PATENTED
MADE & SHIPPED IN THE USA
FREE LIFETIME WARRANTY
NO SOFTWARE REQUIRED
ADAS CALIBRATION TOOLS
The Complete ADAS Calibration Toolkit
Four patented tools covering front radar, blind spot, and advanced driver assistance system calibrations. Each one follows OEM service manual procedures exactly—using precision geometry, not software interpretation. Compatible with every OEM and aftermarket tablet on the market.
Made and shipped from Cape Coral, FL
FRONT RADAR CALIBRATION
RCP-180 Flex
Front Radar Calibration Tool
Built for fast, accurate front radar sensor calibrations in any environment—service bay or mobile. Its patented centerline and perpendicular frame system delivers repeatable precision without a proprietary scanner or subscription. At 26.8 lbs, it goes where the work is.
Centerline and perpendicular frame setup—patented geometry for repeatable accuracy
Works with ALL OEM and aftermarket scan tools—no proprietary tablet
Solid CNC aluminum construction. Durable and maintenance-free
Compatible with Alfa Romeo, Audi, BMW, Chrysler, Dodge, Fiat, Jeep, Nissan, Infiniti, VW
FREE lifetime warranty + direct support from a diagnostic, programming & calibration specialist
38.5"
HEIGHT
16" by 12"
BASE
26.8 lbs
WEIGHT
IN THE BOX
-
Bosch digital laser
-
L-square
-
Center string kit
-
Laser target
-
Crossbar reference guide
-
Inclinometer
-
Laser bullet-point alignment arm
-
Plumb bob
-
White chalk marker / centerline tape
$3,495
$5,995.00
SAVE 42%
BLIND SPOT ALIGNMENT
CJP-907
Blind Spot Measuring & Alignment Tool
Designed for busy collision and repair shops that need fast, reliable Blind Spot Monitor (BSM) sensor alignment. It measures horizontal and vertical angles with geometric precision, then guides technicians to realign body panels to exact factory specifications. Solid stainless steel and aluminum—tough enough to live in a working shop.
Patented—measures Blind Spot Monitor (BSM) horizontal and vertical sensor angles
Guides panel realignment to factory-spec angles with geometric precision
Solid stainless steel frame and aluminum—shop-tough construction
Optional wall-hanging storage unit available—keeps the bay clear
Built on the geometry principle—physical measurement, never software interpretation
FREE lifetime warranty + direct support from a diagnostic, programming & calibration specialist
37.5"
LENGTH
18"
WIDTH
38 lbs
WEIGHT
IN THE BOX
-
CJP-907 Main Frame
-
RSA Unit (Measuring Ruler)
-
Digital Inclinometer
-
907 Alignment Board
-
Digital Protractor
$3,995.00
MOBILE BLIND SPOT SETUP
CJM-908
Portable Mat Blind Spot Alignment Tool
The CJM-908 takes the precision of a full shop jig and puts it in a 12 lb carry case. Designed specifically for mobile ADAS technicians, its mat-based design deploys on any flat surface for fast, geometric blind spot sensor measurement and alignment. No dedicated bay, no installation, no compromises.
Patented mat design—portable blind spot measuring and alignment jig
Simple centerline setup—geometric measurement with minimal prep time
Compatible with all scan tools and OEM calibration procedures
Deploys on any flat surface—service bay or mobile job site
FREE lifetime warranty + direct support from a diagnostic, programming & calibration specialist
56″ × 18″ × 7.5″
MAT
50″ × 10.5″ × 4"
CASE
12 lbs
WEIGHT
IN THE BOX
-
CJM-908 Mat
-
Digital Protractor
-
Plumb Bob
-
Carry Case
-
RSA Unit (Measuring Ruler)
-
Digital Inclinometer
-
Centerline String
$2,195.00
FRONT RADAR & BLIND SPOT
RCT-90 Flex
Compact Radar Calibration Tool
At 6.2 lbs, the RCT-90 Flex is the most portable professional ADAS calibration tool available anywhere. Its patented precision triangle uses centerline geometry for a perfect setup on every calibration, with two interchangeable sizes — standard for most models, and a larger version for Hyundai, Kia, and Genesis. Engineered for mobile technicians and busy service bays alike.
Patented precision triangle—centerline geometry for a perfect setup every time
Two interchangeable triangles: standard and large (for Hyundai / Kia / Genesis)
Works with all OEM and aftermarket scan tools
Compatible with Toyota, Mazda, Lexus, Hyundai, Kia, Genesis, Subaru, Honda, Acura
Solid aluminum and stainless steel—the lightest professional ADAS tool available
FREE lifetime warranty + direct support from a diagnostic, programming & calibration specialist
49.25"
HEIGHT
7′ × 12'
BASE
6.2 lbs
WEIGHT
IN THE BOX
-
RCT-90 Flex Triangle
-
Vertical Plumb Bob
-
One standard cone + one large interchangeable cone
-
Bosch Digital Laser
-
Centerline Starter Kit
-
One universal stand
$1,789.00
BLIND SPOT ALIGNMENT
CJP-907
ADAS Blind Spot Measuring & Alignment Tool
The shop-floor standard for blind spot sensor alignment. Designed for busy collision and repair shops to quickly measure BSM horizontal and vertical angles, then guide technicians to realign body panels to exact factory specifications. Solid stainless steel and aluminum built to live in the shop, not sit in a display case.
Patented. Measures BSM horizontal and vertical sensor angles.
Guides panel realignment to factory-spec angles with digital protractor
Solid stainless steel frame and aluminum. Shop-tough construction.
Optional wall-hanging unit available. Keeps the bay clear.
FREE lifetime warranty + direct tech support from the engineering team.
Length
37.5"
Width
18"
Weight
38lbs
FRONT RADAR & BLIND SPOT
RCT-90 Flex
ADAS Calibration Tool
At 6.2 lbs, the RCT-90 is the most portable professional ADAS calibration tool available anywhere. Patent-pending precision triangle design with two interchangeable sizes. Standard for most models, and a larger version for Hyundai, Kia, and Genesis. Engineered for mobile technicians and busy service bays alike.
Two interchangeable triangles. Covers standard and oversized models.
Compatible with: Toyota, Mazda, Lexus, Hyundai, Kia, Genesis, Subaru, Honda, Acura.
Works with all OEM and aftermarket scan tools.
FREE lifetime warranty + direct tech support from the engineering team.
Height
49.25"
7' x 12'
Base
Weight
6.2 lbs
MOBILE BLIND SPOT SETUP
CJM-908
ADAS Blind Spot Measuring & Alignment Tool
The mobile technician's blind spot solution. The CJM-908 takes the precision of a full shop jig and puts it in a 12 lb carry case. Its mat-based design deploys on any flat surface. No dedicated bay, no installation, no compromises. Fast setup, accurate measurement, and alignment before dynamic or static calibration.
Patented mat design, portable blind spot measuring and alignment jig.
Simple centerline setup. No permanent installation required.
Deploys on any surface. Service bay or mobile job site.
FREE lifetime warranty + direct tech support from the engineering team.
Mat SIze
56" x 18" x 7.5"
50″ × 10.5″ / 12 lbs
Case + Weight
WHY MANUAL PRECISION?
The Geometry Advantage
Most ADAS calibration systems today rely on smart cameras, radar, and software to interpret a geometric procedure. That hardware is accurate — but because it isn't a physical measurement, there's no way to verify it. When a calibration fails, the system gives you a pass or fail and nothing more. No recourse. No explanation of why.
Geometry doesn't work that way. A correctly executed geometric measurement is always accurate, because it follows the same physics the OEM engineers used to design the system. You measure two fixed points — the calibration target and the radar on the vehicle — and you can see exactly where the system is misaligned and which direction it needs to be corrected.
It's the difference between a digital readout and a ruler. A digital meter gives you a number; a ruler lets you measure it, verify it, and adjust by a quarter inch when the job calls for it. No proprietary tablet, no subscriptions, no AI removing the technician from a system that keeps families safe on the road.
HOW WE COMPARE
Manual precision vs. software-dependent systems
The full ADAS Aiming toolkit—all four tools, covering every major calibration type—costs less than a single entry-level software-based system. And you'll never pay another subscription fee.
OUR STORY
Built by a Technician.
Trusted by Hundreds of Shops.
ADAS Aiming was built by career ADAS specialists — technicians who spent years in the field diagnosing, programming, and calibrating the advanced driver assistance systems that keep families safe on the road.
As calibrations became more frequent, the industry responded with bigger rigs, more software, and proprietary tablets — a race between competitors that produced fully automated systems costing up to $90,000. Those systems reduce the technician to tapping “pass” or “fail” on a tablet, and in doing so they remove the one thing that matters most: the ability to verify what actually went wrong when a calibration fails. They also demand thousands of dollars in proprietary software and updates to perform what is, at its core, the simple setup of a target.
ADAS Aiming designed something different. Starting from the OEM service manual — the same document every manufacturer publishes — ADAS Aiming built tools that follow those procedures exactly, using precision instruments instead of software prompts. The result: patented, portable tools that deliver OEM-accurate calibrations every time. No tablet required. No annual fee. No guesswork.
Refined through feedback from hundreds of real shops and mobile technicians across the country. Made and shipped from Cape Coral, Florida.
Multiple Patents
U.S. #11960024B2 · USP #12,596,057
4 Tools
FULL ADAS COVERAGE
USA
MADE & SHIPPED
Lifetime
WARRANTY & SUPPORT
Fantastic tool that makes the job easier. You can count on the angles being correct, getting the job done right the first time. I recommend this tool to all shops who deal with this type of repair.
Kfir Roth
Verified buyer
WHAT SHOPS ARE SAYING
Trusted in the Bay
I purchased the front radar tool about a year ago—well worth the price. Very well built, and it gets the job done for front radar calibrations. Jack is very knowledgeable and answers any question I have, anytime I call.
Mike Somerville
Front radar tool owner
GET IN TOUCH
Talk to Us Directly
Questions about which tool fits your shop, a volume order, or technical support? Reach out—you'll hear back from the team directly.